230V Line Cord, Swiss Plug
SKU: 0K-0276-901The 230V Line Cord, Swiss Plug kit includes a strain relief. The Line Cord can be easily installed using pliers.
$26.07Rheostat, 120V
SKU: 0A-0236-051This Rheostat was used in Vortex-Genie 2 mixers that were produced starting in the year 2000. The part in your unit should look the same as the picture, otherwise refer to Part No. EPP0005.
$59.60Speed Control 230V
SKU: EB-0246-500This 230V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed.
$59.60Rheostat, 230V
SKU: 0A-0246-050This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
$59.60Speed Control 100V
SKU: EB-0286-500This 100V Speed Control was used on Vortex-Genie 2 mixers produced after the year 2000. It can be easily installed. The part in your unit should look the same as the picture, otherwise refer to Part No. 0A-0286-051.
$59.60Rheostat, 100V
SKU: 0A-0286-050This Rheostat was used in Vortex-Genie 2 mixers that were produced prior to the year 2000.
$59.60Rheostat, 100V
SKU: 0A-0286-051This Rheostat was used in Vortex-Genie 2 mixers that were produced starting in the year 2000. The part in your unit should look the same as the picture, otherwise refer to Part No. EB-0286-500.
$59.60Eccentric with Clamp Assembly
SKU: 0K-0236-904This kit contains the Eccentric with Clamp Assembly, which includes the Eccentric, Bearing Retainer, and Eccentric Clamp. This assembly is used on the Motor Assembly.
$89.24Motor 120V Assembly
SKU: 0K-0236-905The 120V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
$154.06Motor 230V Assembly
SKU: 0K-0246-915The 230V Motor Assembly can be easily installed using a 1/4" nut driver and then re-attaching the wires. Please note, if your current motor is stamped Jakel Motors and there is a silver plate attached to the line cord in the housing, this motor has been discontinued. Jakel Motor Company has gone out of business. Unfortunately, our current motor will not fit in your Vortex-Genie 2 mixer.
$154.06